Introduction
Installing a new rest room could look like a daunting undertaking, but with the proper equipment and knowledge, it could be a straightforward process. With this action-by-stage information, We'll wander you through the whole EAGO toilet parts process of putting in a new toilet inside your bathroom. Whether you are replacing an outdated rest room or setting up a single for The 1st time, this tutorial will present you with all the information you have to successfully total the set up.
Step one: Acquire Your Applications and Materials
Before you begin, it is necessary to assemble all the required equipment and elements. Here is a list of parts for EAGO Toilet goods you will need:
- New toilet Wax ring Adjustable wrench Screwdriver Level Hacksaw Bucket Towels
Step 2: Eliminate the Previous Toilet
The first step in setting up a new bathroom is to eliminate the outdated a person. Comply with these techniques to securely remove your outdated toilet:
Shut off the h2o provide: Locate the h2o shut-off valve driving the toilet and switch it clockwise to shut from the drinking water offer.
Empty the tank: Flush the bathroom to eliminate just as much h2o as possible within the tank. Make use of a sponge or towel to soak up any remaining water.
Disconnect the h2o offer line: Use an adjustable wrench to loosen and disconnect the drinking water source line from the bottom of the tank.
Remove the tank: Unscrew and take away the bolts that hold the tank for the bowl. Diligently raise from the tank and established it aside.
Remove the bowl: Unscrew and take away the bolts at The bottom with the toilet bowl. Rock the bowl Carefully back and forth to break it totally free in the wax seal. Carry from the bowl and position it on a towel or inside of a bucket.
Step three: Put together for Installation
Now you have removed the old rest room, it's time to prepare to the installation of the new one. Stick to these techniques to prepare:
Inspect the flange: Take a look at the flange, which happens to be the circular piece that connects the rest room for the waste pipe. Make certain that it truly is in good situation and securely fixed to the ground. Whether it is destroyed or loose, you might have to switch or mend it.
Clean the world: Comprehensively clean the area in which the rest room might be set up. Remove any previous wax or particles from the flange and ground.
Measure for placement: Make use of a tape measure to determine the space in the wall to the center in the flange. This measurement will help you appropriately position your new bathroom.
Step 4: Put in the New Toilet
With all of the preparations total, it's time to put in your new toilet. Follow these ways for a successful set up:
Install the wax ring: Area a brand new wax ring onto the flange, ensuring that it is centered and protected.
Position the rest room: Carefully decreased the bathroom bowl on to the wax ring, ensuring that it aligns Along with the bolt holes around the flange.
Secure with bolts: Insert and tighten bolts throughout the foundation of your toilet bowl and in to the flange. Watch out never to overtighten, as this can crack the porcelain.
Attach tank: Position the tank onto